One Unit Pole equals 1.256637061436e-7 Volt Seconds. You can also write this as 1 Unit Pole = 1.256637061436e-7 Volt Seconds. Use the calculator to convert Unit Pole to Volt Second instantly.
Use this Unit Pole to Volt Second converter to change a value from Unit Pole into Volt Second. Enter the measurement, review the result, and use the conversion when comparing values or checking a formula.
This conversion is useful when a measurement is recorded in Unit Pole but a report, specification, or calculation requires Volt Second. The page includes the unit definitions, a worked example, and a conversion table for related units.
Use the result as a reference and check the displayed precision before copying it into technical or scientific work. The last digits may be rounded for readability.
Unit Pole and Volt Second describe the same magnetic flux measurement in different units. Converting between them makes values easier to compare when different unit systems are used.
How to convert Unit Pole to Volt Second (P to V·s)
To convert Unit Pole to Volt Second, multiply by 1.256637061436e-7. The formula is Unit Pole × 1.256637061436e-7 = Volt Second. See the example below.
1 Unit Pole = 1 × 1.256637061436e-7 = 1.256637061436e-7 Volt Seconds
Unit pole, also known as unit magnetic pole, is a unit of measurement for magnetic flux. It is defined as the pole which when placed in vacuum at a distance of one meter from a similar and equal pole repels it with a force of ¼πμ₀ newtons, where absolute permeability of vacuum or air is equal to 4π × 10⁻⁷ H/m. The symbol for Unit Pole is P.
Volt per second is a unit of measurement for magnetic flux. By definition, volt per second is the magnetic flux in a circuit of one turn that would produce in it an electromotive force of one volt if it were reduced to zero at a uniform rate in one second. The symbol for Volt Second is V·s.
How to Use Unit Pole to Volt Second Converter
Select Unit Pole from the first dropdown and enter the value you want to convert.
Choose Volt Second in the second dropdown to set the target unit.
Review the converted value in the output field.
Check the displayed precision before using the result in another calculation.
For another result, change the input value or either selected unit. The conversion uses the unit definitions in the calculator and formats the result for display.
Example of Unit Pole to Volt Second Conversion
Frequently asked questions about Unit Pole to Volt Second conversion
What does the Unit Pole to Volt Second conversion show?
It shows the equivalent value of one unit in another unit, making it easier to compare measurements and check calculations across different scales.
When should I use a Unit Pole to Volt Second converter?
Use it when you need to compare values, convert technical data, or switch between units used in different settings or systems.
Is this Unit Pole to Volt Second calculator accurate?
It applies the conversion relationship used by the calculator and formats the result for display. Verify the shown precision when the value is used in technical or scientific work.